Description
Sends HDMI resolutions up to 70m over Cat.6 network cable via HDBaseT technology Supports HDMI 18G resolutions up to 4K@60Hz 4:4:4, with additional support for HDR Supports RS-232, bi-directional IR and PoC (Power over Cable) UK standard 1-gang wall plate (86x86mm)andnbsp; 2 year warranty The Lindy Cat.6 HDBaseT HDMI 4K60 Wall Plate Transmitter is one part of a high performance, reliable solution for extending HDMI signals over long distances via Cat.6 network cable.By combining this Transmitter unit with a compatible HDBaseT Receiver such as Lindy No. 38214 and 38342, this solution ensures reliable transmission up to 70m.The following distance and resolution combinations are possible when using high quality Cat.6 or above U/UTP or F/UTP cable:70m: 1920×1080@60Hz 4:4:4 8bit40m: 3840×2160@60Hz 4:4:4 8bit / 4:2:2 12bitSupporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls.PoC (Power over Cable) functionality with On/Off switch provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at one side of the installation.Featuring bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. This extension system allows for complete and simple control for the user providing also RS-232 port via terminal block on the rear side of the wall plate.HDBaset is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.Please Note: the quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 or above cable. Using a different cable type, introducing couplers or patch panels may result in a reduction of possible distances. Features Certification California Proposition 65 Product colour Black, White HDCP Yes HDCP version 2.2 On/off switch Yes Wall mountable Yes Material Metal Bandwidth 18 Gbit/s Infrared (IR) frequency range 20 – 60 kHz RS-232 pass-through Yes Bidirectional Yes Extended display identification data (EDID) Yes Maximum refresh rate 60 Hz Maximum transfer distance 70 m Chipset VS010 Cable types supported Cat6 Maximum resolution 3840 x 2160 pixels Type AV transmitter Ports & interfaces 3.5 mm (1/8-inch) in Yes 3.5 mm (1/8-inch) out Yes RS-232 output ports 1 HDMI in 1 HDMI version 2.0 HDBaseT port Yes RJ-45 output ports 1 Connectivity technology Wired Power Power requirements 24VDC 1A Output current 1 A Operating voltage (transmitter) 24 V Power source type DC Operational conditions Operating temperature (T-T) 0 – 40 °C Storage temperature (T-T) -20 – 60 °C Operating relative humidity (H-H) 20 – 90% Weight & dimensions Weight 390 g Height 86 mm Depth 38 mm Width 86 mm Packaging data Package type Box Package weight 540 g Package height 133 mm Package depth 95 mm Package width 152 mm Quantity per pack 1 pc(s) Packaging content Packaging content HDMI TransmitterMulti-country Power Supply (UK, EU, US & AUS)IR Emitter Cable, 1.5mIR Receiver Cable, 1.5m3-Pin Terminal Block2-Pin Terminal BlockLindy Manual Manual Yes Technical details Sustainability compliance Yes Special features Bi-directional IR, PoC Warranty period 2 year(s) Compliance certificates CE, Federal Communications Commission (FCC), RoHS, UKCA manual pdf CE Declaration of Conformity
Reviews
There are no reviews yet.